ATV Flags

flags | gear | sale 

Dealer/Wholesale inquiry

shipping & return policy
use and care of your off road flag
Colors on your monitor may not match the product exactly.
***Notice*** Please check out our policy page for temporary shipping policy changes.

small flags

better quality flags & whips
light weight & novelty ATV flags
bicycle, scooter & golf cart flags
quick changer flags

quick release mounts
poles, mounts & flag clips
specialty items

large flags

3ft X 5ft & 2ft X 3ft
sand rail flags & dune buggy flags
RV & Toy Hauler flags

All flags ordered as a combo will come mounted on your choice of black fiberglass pole.

Extremely tough vinyl coated mesh flags stands up to highway speeds and extreme weather conditions.
The flow through design of the mesh drastically reduces wind drag and whip
making it a good choice for highway and off road vehicles to bicycles and snowmobiles.
Flag measures approximately 9 x 14, casing fits up to 3/8 whips
and replacement flag comes with rubber grommets to aid in mounting your flag.
Pics of flags tested on the highway on our gallery page.

The Regulator We call this combination "The Regulator" because you can put together a combo to meet most any dune safety flag regulation! The 2 piece black fiberglass whip when assembled is a full 8ft in height and when mounted on a normal ATV the top of the pole meets even the strict 10ft safety whip requirements of some riding areas. The top flag is an 8 X 14 mesh pennant, 9 x 14 mesh rectangle, or a USA flag. Be sure to check with your local authorities for flag requirements. Meet your riding area regulations while sporting a little attitude! Please be sure to choose one of the mesh pennants above and one of the 12 X 18 polyester flags pictured below.
*SAMPLE COMBINATIONS* Please be sure to choose your flag style.	Available with 6 ft black fiberglass whip or 8ft 2 piece black fiberglass whip with metal ferrule connector. ATV Regulator Qty: Top Flag: Lower Flag:

Lightweight polyester ATV flags. Replacement flags fit fiberglass poles up to 5/16 inch. Order as a replacement flag or add a fiberglass whip and a mounting bolt. Flag prints are fully visible on both sides, print shows in reverse on the back side. Edges are single stitched with a lightweight casing to slip over your pole. Mounting and care suggestions on our care page Military ATV Flags & USA ATV Flags lightweight polyester flags are suitable for off road use, not recommended for highway vehicles
	USA ATV Flag Qty: Flag options:
	POW MIA ATV Flag Qty: Flag options:
	Army ATV Flag Qty: Flag options:
	Navy ATV Flag Qty: Flag options:
	US Air Force ATV Flag Qty: Flag options:
	Marine ATV Flag Qty: Flag options:
	US Coast Guard ATV Flag Qty: Flag options:
	Navy Jack Don't Tread on Me ATV Flag Qty: Flag options:
	Gadsden Don't Tread on Me ATV Flag Qty: Flag options:
Novelty ATV Flags & Pirate ATV Flags 12 X 18 inch Polyester ATV flags. Casing fits up to 5/16 whip.
	Christian ATV Flag Qty: Flag options:
	Black and white racing checker ATV Flag Qty: Flag options:
	Red and white racing checker ATV Flag Qty: Flag options:
	Pink and white racing checker ATV Flag Qty: Flag options:
	Rebel ATV Flag Qty: Flag options:
	Surrender the Booty Pirate ATV Flag Qty: Flag options:
	Black Pirate with red bandanna ATV Flag Qty: Flag options:
	Deadmans Chest Pirate ATV Flag Qty: Flag options:
	3 skull n crossbones ATV Flag Qty: Flag options:
	Pink Pirate Princess ATV Flag Qty: Flag options:
	Pirate Queen ATV Flag Qty: Flag options:
	Yellow Smiley Face ATV Flag Qty: Flag options:
	Red Beer Mug ATV Flag Qty: Flag options:
	Five O'clock somewhere ATV Flag Qty: Flag options:
Blank ATV Flags 12 X 18 inch Polyester ATV flags. Casing fits up to 5/16 whip.
	Solid Orange ATV Flag Qty: Flag options:
	Solid Red ATV Flag Qty: Flag options:
	Solid White ATV Flag Qty: Flag options:
	Solid Purple ATV Flag Qty: Flag options:
	Solid Black ATV Flag Qty: Flag options:
	Oregon State ATV Flag Qty: Flag options:
	California State ATV Flag Qty: Flag options:
	Arizona State ATV Flag Qty: Flag options:
	Texas State ATV Flag Qty: Flag options:
	Mexico ATV Flag Qty: Flag options:

WheelerWhip ATV Flags 12 X 18 inch WheelerWhip brand ATV Flags available as replacement flag or add the whip of your choice. WheelerWhip brand flags are mounted using a rubber grommet system to allow the flag to rotate freely on your whip.
	Wheeler Whip Maltese Check ATV Flag Qty: Flag options:
	Wheeler Whip Red Flame ATV Flag Qty: Flag options:
	Wheeler Whip Buccaneer Pirate ATV Flag Qty: Flag options:
	Wheeler Whip Pink Camouflage ATV Flag Qty: Flag options:
	Wheeler Whip Hibiscus Flower ATV Flag Qty: Flag options:

Light Weight & Novelty ATV Flags | Bicycle Flags | Large Flags | Mounts, Poles & Accessories | Clearance Sale

How long will my off road flag last?
Use and care of your ATV flag.

These items are sold without warranty, expressed or implied except for quality of construction.
No warranty or representation is made as to any product's ability to protect the user from accident or injury.
The user/purchaser assumes that risk.

home | contact | gallery | about |

flags | gear | sale

ATV Flags

AditudeGear Mesh Flags

The Regulator

Please be sure to choose one of the mesh pennants above and one of the 12 X 18 polyester flags pictured below.

Lightweight polyester ATV flags. Replacement flags fit fiberglass poles up to 5/16 inch.

Order as a replacement flag or add a fiberglass whip and a mounting bolt. Flag prints are fully visible on both sides, print shows in reverse on the back side. Edges are single stitched with a lightweight casing to slip over your pole.Mounting and care suggestions on our care page

Military ATV Flags & USA ATV Flags

**lightweight polyester flags are suitable for off road use, not recommended for highway vehicles**

Novelty ATV Flags & Pirate ATV Flags

12 X 18 inch Polyester ATV flags. Casing fits up to 5/16 whip.

Blank ATV Flags

12 X 18 inch Polyester ATV flags. Casing fits up to 5/16 whip.

WheelerWhip ATV Flags

12 X 18 inch WheelerWhip brand ATV Flags available as replacement flag or add the whip of your choice. WheelerWhip brand flags are mounted using a rubber grommet system to allow the flag to rotate freely on your whip.

These items are sold without warranty, expressed or implied except for quality of construction. No warranty or representation is made as to any product's ability to protect the user from accident or injury. The user/purchaser assumes that risk.

Lightweight polyester ATV flags.
Replacement flags fit fiberglass poles up to 5/16 inch.

Order as a replacement flag or add a fiberglass whip and a mounting bolt.
Flag prints are fully visible on both sides, print shows in reverse on the back side.
Edges are single stitched with a lightweight casing to slip over your pole.
Mounting and care suggestions on our care page

lightweight polyester flags are suitable for off road use, not recommended for highway vehicles

12 X 18 inch Polyester ATV flags.
Casing fits up to 5/16 whip.

12 X 18 inch Polyester ATV flags.
Casing fits up to 5/16 whip.

12 X 18 inch WheelerWhip brand ATV Flags available as replacement flag or add the whip of your choice.

WheelerWhip brand flags are mounted using a rubber grommet system to allow the flag to rotate freely on your whip.

These items are sold without warranty, expressed or implied except for quality of construction.
No warranty or representation is made as to any product's ability to protect the user from accident or injury.
The user/purchaser assumes that risk.